STEP A
The RidgeRiser™ is attached to the 2x2 first. It is applied on 2 foot centers. Fastener is only required on one side.

STEP B:
Bend RidgeRiser™ out at bending line for approprioate tile profile.

• For low profile tile, use the top bending line on each side.
• For medium profile tile, use the second bending line on each side.
• For high profile tile, use bottom bending line on each side. Nail to deck or raised counter batton with two roofing nails on each side.

On high profile tile, add a 1x2 on top of the 2x2 on all hips. It is not necessary to nail the RidgeRiser™ into the rafters.